Sorry! Something went wrong. Please reload the page and try again.
Market Overview:

Used Haas VF-3 for sale

General Specs

Rate this product!
0.0 (0)
Thank you!
You have already rated.
Rating is not available. Try again later.
Category: Vertical Machining Center
Manufacturer:
Model: VF-3
Condition: Used

Technical Specifications

Manufacturer: Haas
Model: VF-3
Condition: Used
Max Torque w/opt Gearbox 250 ft-lb @ 450 rpm (339 Nm @ 450 rpm)
T-Slot Width 5/8 " (16 mm)
Max Speed 8100 rpm
Max Thrust Z 4200 lb (18683 N)
Y Axis 20 " (508 mm)
Bearing Lubrication Air/Oil Injection
Tool-to-Tool (avg) 4.2 sec (4.2 sec)
Coolant Capacity 55 gal (208 L)
Max Weight on Table (evenly distributed) 3500 lb (1588 kg)
Length 48 " (1219 mm)
Max Thrust Y 2550 lb (11343 N)
Width 18 " (457 mm)
Air Required 4 scfm. 100 psi (113 L/min. 6.9 bar)
Taper CT or BT 40
X Axis 40 " (1016 mm)
Max Tool Weight 12 lb (5.4 kg)
Max Torque 90ft-lb @ 2000 rpm (122 Nm @ 2000 rpm)
Rapids on Y 1000 in/min (25.4 m/min)
Cooling Liquid Cooled
Spindle Nose to Table (~ min) 4 " (102 mm)
Chip-to-Chip (avg) 4.5 sec (4.5 sec)
Number of Std T-Slots 5
Max Cutting 650 in/min (16.5 m/min)
Spindle Nose to Table (~ max) 29 " (737 mm)
Max Rating 30 hp (22.4 kW)
Rapids on Z 1000 in/min (25.4 m/min)
Max Tool Diameter (full) 3.5 " (89 mm)
Max Thrust X 2550 lb (11343 N)
Tool Changer Type Carousel (SMTC Optional)
Z Axis 25 " (635 mm)
T-Slot Center Distance 3.15 " (80.0 mm)
Rapids on X 1000 in/min (25.4 m/min)
Capacity 20
Drive System Inline Direct-Drive

Haas VF-3 from other providers

This may be also interesting for you